Free Rigging Starter · lesson 1 of 4 · no sign-up
Hitches
Rig a motor, a length of pipe and a gearbox. Read the sling tag, choke a load, cradle one in a basket and lower the sling angle until the legs are overloaded.
The sample lesson. Every CrewForge lesson works like this one: short simulator pages, one idea each, with the narrator, practice questions and a summary sheet.
Open full screen · 5 pages · 10 practice questions · narrated (AI voice) · exam preparation only: always check the tag, the manufacturer's data and your lift plan.
What's in the lesson
- Vertical hitch. A 1/2 in wire rope sling, eye and eye, hangs from the crane hook to a shackle pinned through the motor's own lifting eye.
- Choker hitch. A 2 in, 2-ply polyester web sling is choked round an 8 ft steel pipe that rests on cribbing.
- Basket hitch. One purple polyester roundsling (tag: 2,600 lb vertical, 5,200 lb basket) cradles a pipe.
- Sling angles. A two-leg 1/2 in wire rope bridle: both top eyes on one master link in the crane hook, each bottom eye on a shackle pinned through a lug on the beam.
- Putting it together. A 2,400 lb gearbox (weight from the maker's manual) sits on a pallet.
How it works
- One idea per page, each built around a simulator you work yourself. The last page puts it all together on one job.
- A narrator reads each step aloud. Mute it or slow it down at the top right, or read it yourself.
- Each step tells you what to do and what to watch. Stuck? Hint, then Show me: the simulator does it, then hands back.
- Practice questions along the way. Pick a wrong answer and you see why it's wrong, then get a new, similar question.
- After the steps, free play: every control unlocked, Reset, and "Give me a challenge".
- Nothing locks. Back and Next always work, and your place is kept in this browser.
- Print the short summary sheet: the rules and key numbers, light on toner.
Exam preparation, not a procedure. On the job, check the tag, the manufacturer's data and your lift or work plan.
